top of page
AIR OXYGEN BLENDER
OxyBlend Air-Oxygen Blender GMX-030U-AIR_02-P15-N
OxyBlend Air-Oxygen Blender GMX30-U-AIR_O2-P3-A15
OxyBlend Air-Oxygen Blender GMX30-U-AIR_O2-P3
OxyBlend Air-Oxygen Blender GMX30E-AIR_O2
OxyBlend Air-Oxygen Blender GMX30E-AIR_O2
OxyBlend Air-Oxygen Blender GMX30U-AIR_O2-P15-FM293-1L
OxyBlend Air-Oxygen Blender OxyBlend
OxyBlend Air-Oxygen Blender OxyBlend_medical
OxyBlend Air-Oxygen Blender OxyBlend_medical_
FLOWMETERS
GENTEC Air Flowmeters FM187B-15L-00_0
Features
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
GENTEC Air Flowmeters FM187B-15L-DHE
Features
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
GENTEC Air Flowmeters FM187B-15L-P
Features
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
GENTEC Air Flowmeters FMD187B-15L-00-P
Features
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
GENTEC Air Flowmeters FMD187B-15L-00_0
Features
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
GENTEC Air Flowmeters FMT187B-15L-00
Features
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
Nebbulator FMB197A-15-07L
Features
• 50 psi power take off, can be used for multiple products that need 50 psi to power their equipment • Neb treatments
• Resuscitation bags •Multiplepresetflows
• The Nebbulator is available for use with adult and pediatric flowmeters
• The Nebulator Block can be used as a standalone with multiple stand alone settings
• Available in Brassor Aluminum (flowmeter)
• 50 psi power take off, can be used for multiple products that need 50 psi to power their equipment • Neb treatments
• Resuscitation bags •Multiplepresetflows
• The Nebbulator is available for use with adult and pediatric flowmeters
• The Nebulator Block can be used as a standalone with multiple stand alone settings
• Available in Brassor Aluminum (flowmeter)
Nebbulator FMB197A-15-07L
• 50 psi power take off, can be used for multiple products that need 50 psi to power their equipment • Neb treatments
• Resuscitation bags •Multiplepresetflows
• The Nebbulator is available for use with adult and pediatric flowmeters
• The Nebulator Block can be used as a standalone with multiple stand alone settings
• Available in Brassor Aluminum (flowmeter)
• Resuscitation bags •Multiplepresetflows
• The Nebbulator is available for use with adult and pediatric flowmeters
• The Nebulator Block can be used as a standalone with multiple stand alone settings
• Available in Brassor Aluminum (flowmeter)
Neonatal, Perinatal and Specialty Air-Oxygen Flowmeters FM293-16L-00_double
Features
• Available for oxygen and air with accuracy and performance.
• Acrylic block provides a strong and superior-looking flow tube.
• 200 cc and 1LPM model are designed for perinatal and neonatal applications where extreme accuracy under very low flow is required.
• Precise flow control.
• Maximum Inlet Pressure: 100PSI.
• Inlet Connection: See table below (Models for additional inlet connections are available).
• Outlet: DISS Male (9/16“-18UNF).
• Calibrated at 50PSI.
• Available for oxygen and air with accuracy and performance.
• Acrylic block provides a strong and superior-looking flow tube.
• 200 cc and 1LPM model are designed for perinatal and neonatal applications where extreme accuracy under very low flow is required.
• Precise flow control.
• Maximum Inlet Pressure: 100PSI.
• Inlet Connection: See table below (Models for additional inlet connections are available).
• Outlet: DISS Male (9/16“-18UNF).
• Calibrated at 50PSI.
Neonatal, Perinatal and Specialty Air-Oxygen Flowmeters FM293-1L-X_double_0
Features
• Available for oxygen and air with accuracy and performance.
• Acrylic block provides a strong and superior-looking flow tube.
• 200 cc and 1LPM model are designed for perinatal and neonatal applications where extreme accuracy under very low flow is required.
• Precise flow control.
• Maximum Inlet Pressure: 100PSI.
• Inlet Connection: See table below (Models for additional inlet connections are available).
• Outlet: DISS Male (9/16“-18UNF).
• Calibrated at 50PSI.
• Available for oxygen and air with accuracy and performance.
• Acrylic block provides a strong and superior-looking flow tube.
• 200 cc and 1LPM model are designed for perinatal and neonatal applications where extreme accuracy under very low flow is required.
• Precise flow control.
• Maximum Inlet Pressure: 100PSI.
• Inlet Connection: See table below (Models for additional inlet connections are available).
• Outlet: DISS Male (9/16“-18UNF).
• Calibrated at 50PSI.
Neonatal, Perinatal and Specialty Air-Oxygen Flowmeters FM293-200 CC-X_double
Features
• Available for oxygen and air with accuracy and performance.
• Acrylic block provides a strong and superior-looking flow tube.
• 200 cc and 1LPM model are designed for perinatal and neonatal applications where extreme accuracy under very low flow is required.
• Precise flow control.
• Maximum Inlet Pressure: 100PSI.
• Inlet Connection: See table below (Models for additional inlet connections are available).
• Outlet: DISS Male (9/16“-18UNF).
• Calibrated at 50PSI.
• Available for oxygen and air with accuracy and performance.
• Acrylic block provides a strong and superior-looking flow tube.
• 200 cc and 1LPM model are designed for perinatal and neonatal applications where extreme accuracy under very low flow is required.
• Precise flow control.
• Maximum Inlet Pressure: 100PSI.
• Inlet Connection: See table below (Models for additional inlet connections are available).
• Outlet: DISS Male (9/16“-18UNF).
• Calibrated at 50PSI.
Neonatal, Perinatal and Specialty Air-Oxygen Flowmeters FM293-3L-X_double
Features
• Available for oxygen and air with accuracy and performance.
• Acrylic block provides a strong and superior-looking flow tube.
• 200 cc and 1LPM model are designed for perinatal and neonatal applications where extreme accuracy under very low flow is required.
• Precise flow control.
• Maximum Inlet Pressure: 100PSI.
• Inlet Connection: See table below (Models for additional inlet connections are available).
• Outlet: DISS Male (9/16“-18UNF).
• Calibrated at 50PSI.
• Available for oxygen and air with accuracy and performance.
• Acrylic block provides a strong and superior-looking flow tube.
• 200 cc and 1LPM model are designed for perinatal and neonatal applications where extreme accuracy under very low flow is required.
• Precise flow control.
• Maximum Inlet Pressure: 100PSI.
• Inlet Connection: See table below (Models for additional inlet connections are available).
• Outlet: DISS Male (9/16“-18UNF).
• Calibrated at 50PSI.
Neonatal, Perinatal and Specialty Air-Oxygen Flowmeters FM293-75L-00_double
Features
• Available for oxygen and air with accuracy and performance.
• Acrylic block provides a strong and superior-looking flow tube.
• 200 cc and 1LPM model are designed for perinatal and neonatal applications where extreme accuracy under very low flow is required.
• Precise flow control.
• Maximum Inlet Pressure: 100PSI.
• Inlet Connection: See table below (Models for additional inlet connections are available).
• Outlet: DISS Male (9/16“-18UNF).
• Calibrated at 50PSI.
• Available for oxygen and air with accuracy and performance.
• Acrylic block provides a strong and superior-looking flow tube.
• 200 cc and 1LPM model are designed for perinatal and neonatal applications where extreme accuracy under very low flow is required.
• Precise flow control.
• Maximum Inlet Pressure: 100PSI.
• Inlet Connection: See table below (Models for additional inlet connections are available).
• Outlet: DISS Male (9/16“-18UNF).
• Calibrated at 50PSI.
Neonatal, Perinatal and Specialty Air-Oxygen Flowmeters FM293-75L-N_double
Features
• Available for oxygen and air with accuracy and performance.
• Acrylic block provides a strong and superior-looking flow tube.
• 200 cc and 1LPM model are designed for perinatal and neonatal applications where extreme accuracy under very low flow is required.
• Precise flow control.
• Maximum Inlet Pressure: 100PSI.
• Inlet Connection: See table below (Models for additional inlet connections are available).
• Outlet: DISS Male (9/16“-18UNF).
• Calibrated at 50PSI.
• Available for oxygen and air with accuracy and performance.
• Acrylic block provides a strong and superior-looking flow tube.
• 200 cc and 1LPM model are designed for perinatal and neonatal applications where extreme accuracy under very low flow is required.
• Precise flow control.
• Maximum Inlet Pressure: 100PSI.
• Inlet Connection: See table below (Models for additional inlet connections are available).
• Outlet: DISS Male (9/16“-18UNF).
• Calibrated at 50PSI.
Oxygen Flowmeter with Humidifier FM897A-15L-OH_0
Features
• Polycarbonate flow tube and outer cover are impact resistant for maximum durability and service life
• Chrome-plated brass (FM891, FM897B) or Anodized aluminum body (FM897A)
• With choices of quick connections: Ohmeda, DISS, Chemetron, Puritan-Bennett, FS, GS, BS, JIS, SIS
• Back pressure compensated and calibrated at 50 psi *
• Polycarbonate flow tube and outer cover are impact resistant for maximum durability and service life
• Chrome-plated brass (FM891, FM897B) or Anodized aluminum body (FM897A)
• With choices of quick connections: Ohmeda, DISS, Chemetron, Puritan-Bennett, FS, GS, BS, JIS, SIS
• Back pressure compensated and calibrated at 50 psi *
Oxygen Flowmeters FM177B-12L-00_0
Description
• Gentec Flowmeters have an antimicrobial additive* in the rotary knobs; extremely durable, the hood and metering tube are made out of polycarbonate
• Needle valves for maximum flow control precision; green color-coding indicates medical air; all flowmeters have a stainless steel ball float, are thoroughly tested for accuracy and are back-pressure compensated
• Aluminum body, weight (no adapter): 4.24 oz/122 g; Increment: 0-6 LPM in 1/2 LPM increment, 6-15 LPM in 1 LPM increment; Flush Flow Rate: 65 LPM (depending on supply flow); Max Inlet Pressure: 100 psig
• Gentec Flowmeters have an antimicrobial additive* in the rotary knobs; extremely durable, the hood and metering tube are made out of polycarbonate
• Needle valves for maximum flow control precision; green color-coding indicates medical air; all flowmeters have a stainless steel ball float, are thoroughly tested for accuracy and are back-pressure compensated
• Aluminum body, weight (no adapter): 4.24 oz/122 g; Increment: 0-6 LPM in 1/2 LPM increment, 6-15 LPM in 1 LPM increment; Flush Flow Rate: 65 LPM (depending on supply flow); Max Inlet Pressure: 100 psig
Oxygen Flowmeters FM197A-15L-DHE_0
Features
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
Oxygen Flowmeters FM197A-30L-00
Description:
• Gentec Flowmeters have an antimicrobial additive* in the rotary knobs; extremely durable, the hood and metering tube are made out of polycarbonate
•Needle valves for maximum flow control precision; green color-coding indicates medical air; all flowmeters have a stainless steel ball float, are thoroughly tested for accuracy and are back-pressure compensated
•Aluminum body, weight (no adapter): 4.24 oz/122 g; Increment: 0-6 LPM in 1/2 LPM increment, 6-15 LPM in 1 LPM increment; Flush Flow Rate: 65 LPM (depending on supply flow); Max Inlet Pressure: 100 psig
• Gentec Flowmeters have an antimicrobial additive* in the rotary knobs; extremely durable, the hood and metering tube are made out of polycarbonate
•Needle valves for maximum flow control precision; green color-coding indicates medical air; all flowmeters have a stainless steel ball float, are thoroughly tested for accuracy and are back-pressure compensated
•Aluminum body, weight (no adapter): 4.24 oz/122 g; Increment: 0-6 LPM in 1/2 LPM increment, 6-15 LPM in 1 LPM increment; Flush Flow Rate: 65 LPM (depending on supply flow); Max Inlet Pressure: 100 psig
Oxygen Flowmeters FM197A-3L-00
Features
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
Oxygen Flowmeters FM197A-3L-0
Features
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
Oxygen Flowmeters FM197A-50L-00
Features
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• 5-year warranty
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• 5-year warranty
Oxygen Flowmeters FM197B-15L-00_0
Features
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• 5-year warranty
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• 5-year warranty
Oxygen Flowmeters FM197B-15L-OEE
Features
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• 5-year warranty
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• 5-year warranty
Oxygen Flowmeters FM197B-15L-P
Features
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• 5-year warranty
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• 5-year warranty
Oxygen Flowmeters FM197B-6L_0
Features
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• 5-year warranty
• Gentec flowmeters have a 0-15 LPM flow range, with a minimum of 65 LPM flush flow rate
• The bases are available in either nickel plated solid brass or aluminum
• Durable polycarbonate hood and metering tube
• Stainless steel ball float
• Flowmeters are all calibrated at 50 psig and 70˚ F
• Flowmeters are all back-pressured compensated
• MRI compatible brass (optional)
• Dual flowmeter (available)
• ISO flowmeters oxygen (available)
• 5-year warranty