top of page

Medical Gas Alarm (Atlas)



Atlas Area Alarm actively monitors your gas on a highly visible 10” (25.4cm) TFT LCD touch screen. Atlas comes with various communication protocols including RS 485, UDP and Ethernet. Alarm conditions can be viewed on a smart phone, tablet or computer connected to the facilities’ intranet. Output channels allow for customized alerts such as sending an email, pager, external alarm signal, or even control functions. Atlas Area Alarm As an area alarm, it is capable of continuously monitoring up to 8 gas sensor modules, mounted locally or remotely. Programmable units of measure of each gas to read psi, mmHg, kPa, MPa or bar. Alarms are preset with NFPA alarm values but are field adjustable for lower and upper limit alarm values. Atlas Master Alarm As a master alarm, it can monitor up to 14 points. The status of each point is continuously monitored; Gray is for normal condition, Yellow for caution that the alarm limit is almost reached, and Red when the alarm limit is reached and alarm triggered. Atlas Combination Alarm As a combination alarm, it can monitor dry contacts, digital gas sensor modules and 4-20mA transducers as an area and master alarm displayed on the Touch Screen LCD.


• The Atlas provides master, area, and combination alarm signals as required by the latest edition of NFPA99.

• The alarm is ETL listed to UL 1069 and CSA C22.2 No. 205 Signal Equipment

• On-site customization without the use of a laptop, tablet, or mobile device.

• 10” (25.4cm) Touch Screen Display with Password protected interface.

• Full networking capabilities including Modbus RTU/TCP, UDP protocols.

• A Trend Log to view the pressure trends and forecast if maintenance or additional support is required.

• An Event Log allows for a view history of time-stamped alarm events.

• Built-in webpage for viewing alarm conditions.

• Can be connected via VNC apps for smartphone and tablets.







Input and Output

Ordering Info

bottom of page